Radiodetection

The Radiodetection has developed a range of locators to dig safely and efficiently.

C.A.T Locator & Genny Transmitter

 RD400 Digital Locator

Radiodetection Pipeline Current Mapper

C.A.T Locator
Accurate, even in congested areas. Easy to use with clear Audio output Rugged and weatherproof.

Genny Signal Transmitter
The genny applies a distinctive
 tracing signal to the target line
 for the C.A.T to locate.
Distinctive signal applied
 by induction or connection

 For locating all buried pipes and cables the RD400 range of locators provides the most comprehensive range of features to make locating simple and accurate.

  
Used for efficient trouble shooting of cathodic protection systems on buried pipelines.  The PCM  now provides with an accurate cost-effective product that can be used in all weather and ground conditions.

Transmitter Range

Used to apply an external signal to a buried pipe or cable by direct connection or induction

RD400FFL & A-Frame FaultFinder

Especially developed to find sheath faults. Line and fault location in one easy to use receiver. Simple meter response shows position of cable and indicates direction and position of fault.

RD500 Plastic Water Pipe Locator

Used to locate and trace buried plastic water pipes. the system consists of a receiver and a transonde transmitter. 

HCTx-2
 A powerful 5 Watt transmitter which can be used for both locating and FaultFinding. The digital display provides line and output information for each of the power outputs, frequency selection and confirms quality of direct connection.

RD500 Plastic Gas Pipe Locator

The system locates buried gas lines by introducing an identifiable acoustic signal into the pipe.

LCTx
A small compact transmitter or general purpose use.

 

Radiodetection Accessories
Receiver Stethoscopes & Clamps:-
Plug into the receiver and allow signals on specific cables to be monitored.
Provide access to cables located in cramped situations.
CD Stethoscope has LEDs that indicate direction of current flow for positive identification of cables.
Transmitter Clamps:-

Allows transmitter signal to be applied safely to a specific cable without electrical contact.
Sondes:-

Sondes are battery powered transmitters whose signals are used to indicate their position when inserted into an underground duct, drain or sewer, or when attached to moving objects such as cameras or boring tools.
FlexRod:-
Used to push sondes into underground ducts, drains, and sewers.

FlexiSonde:-
Provides a means of tracing small bore pipes by utilising a built in sonde.

FlexiTrace:-
Enables complete length of duct, drain or pipe to be traced by externally applied signal.
 

For further information please contact:    @

'+ 973 401 555